SGdesignDIN7991BushingE
by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - ENG-Designs
Introduced first in SolidGeometry 5.2, Creation date: 2022-06-04, Last change: 2025-09-15
creates subtraction solids for a screw fixation at a specific frame position of a solid
Description
This function is designed for KERBKONUS bushings
THIS FUNCTION USES FITTINGS by function slfit und DIN4AMfitting
If two elements should be connected using a DIN7991 Screw and a Kerbkonus bushing, this function helps to create the subtraction solids to achive a functional connection using standard machine elements.
No pocket holes are support yet
Support spacer such as radial bearings, axial bearings
See Also: SGdesignDIN7991
, SGdesignDIN912BushingE
, SGdesignDIN912DIN985
, SGdesignDIN912DIN985axialbearing
, SGdesignDIN912DIN985axradbearing
, SGdesignDIN912DIN985radialbearing
Example Illustration
Syntax
[Hsub,Nsub,SS,Hadd,Nadd,Parts]=SGdesignDIN7991BushingE([mlb,ins,tpl])
Input Parameter
mlb: | | [M-Screw Length overlength and spacer]; default [2.5 6 0 0] |
ins: | | Characters for "T"unnel or "P"ocket; default is 'TT' for [HEAD NUT] |
tpl: | | Length of Insertion T/P for [HEAD NUT]; default is 10 10 |
Output Parameter
Hsub: | | Subtraction Solid for Head side including frame 'C' |
Nsub: | | Subtraction Solid for Bushing side including frame 'C' |
SS: | | Srew and Nut for Visualziation including frame 'C' |
Hadd: | | remaining wall thickness |
Nadd: | | parts list for assembly of one connection |
Parts: | | |
Examples
SGdesignDIN7991BushingE([2.5 3 0 5],'TT',5);
[Hsub,Nsub,S,Hadd,Nadd]=SGdesignDIN7991BushingE([2.5 3 0 5],'TT',5);
Copyright 2022-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth
Last html export of this page out of FM database by TL: 2025-09-21