SGmicroscopeclamp

by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - USB Interface
Introduced first in SolidGeometry 5.0, Creation date: 2020-09-18, Last change: 2025-09-14

delivers a spare part for a typical USB microscope camera in 2020

Description

The ring has an inner diameter of 31mm, as well as an inner circumferential pin ring with an inner diameter of 28mm. The ring is closed up to an inner diameter of 24mm and has a height of 2.5mm. The outer ring has a height of 15mm. The outer ring has a wall thickness of 1.5mm. The ball with a radius of 5mm is located at a distance of 10mm from the ring.
SGmicroscopeclamp_org is an exact copy of the sold structure while this function designs automatically a beded rod for changing the distance between camera and table

See Also: SGmicroscopetable , SGdesignfaceconnectingrod

Example Illustration

missing image of SGmicroscopeclamp(DH)

Syntax

[SG,SGM,SGB]=SGmicroscopeclamp([DH])

Input Parameter

DH: Difference height; default is 0;

Output Parameter

SG: Solid Geometry to print
SGM: Solid of the Ring
SGB: Solid of the Ball

Examples


SGmicroscopeclamp(40);



Copyright 2020-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth

Last html export of this page out of FM database by TL: 2025-09-21