SGradialhooks
by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - Parametric Design
Introduced first in SolidGeometry 5.4, Creation date: 2024-06-15, Last change: 2025-09-15
Creates hooks for a rotating bayonet catch
Description
Slot of slfit('c') ==> loos, Slot of slfit('t') ==> tight
The hooks need a width of 2mm and a height of at least 1.2mm
The slot should be widened sls, but the increase should only be slt.
It should be printed without a support structure so that the hooks remain undamaged
See Also: CPLradialslots
Example Illustration
Syntax
[SGN,CPLh]=SGradialhooks([RRR,nmax])
Input Parameter
RRR: | | [Inner-Radius Length Slot-Height Hook-Height optional-tube] default is [20 10 2 5 2 0] |
nmax: | | maximum numbers of Hooks; default is 5 |
Output Parameter
SGN: | | Solid Geometry of Radial Hooks |
CPLh: | | Exact contour without fittinhs |
Examples
SGradialhooks([40 10 2 1 3 10],99) % allowed maximum of 99 reduced to 4 possible Hooks
SGradialhooks([40 10 2 1 3 10],5) % reduced to maximum of 3
SGradialhooks([40 10 2 1 3 10],2) % reduced to maximum of 2
Copyright 2024-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth
Last html export of this page out of FM database by TL: 2025-09-21