SGManipulator05Link
by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - Kinematics and Frames
Introduced first in SolidGeometry 4.9, Creation date: 2020-07-14, Last change: 2025-09-14
Link and Link extender for Manipulator Design # 5
Description
Those parts can be assembled using screws, spacer, and nut of DIN DIN 912, DIN 985, DIN 433 using Diameter 2.5mm and 8mm length and a ball bearing S692-X-2Z (2.50 Euro /Stück) with inside 2.5mm, outside 7mm and width 3.5mm
See Also: SGdimensioning4
, SGManipulator04Base
, SGManipulator04Link
, SGManipulator05Base
Example Illustration
Syntax
[SL,SL2]=SGManipulator05Link([LL])
Input Parameter
LL: | | Axis Distance; default is 40 |
Output Parameter
SL: | | Link 2.5mm screw and 2.5mm Nut |
SL2: | | Link 2.5mm screw nut and 2.5mm screw nut |
Examples
[A,B,C,H,EF]=SGManipulator05Base
[D]=SGManipulator05Link % Link and link extender
SGTchain({A,B,C,D,H,B,H,EF},[pi pi 0 pi 0 pi 0]); SGn=ans; SGfigure; SGplotalpha(SGn,'w'); view(-30,30); fullview(0.5)
SGfigure; view(-30,30); SGplotalpha(SGn);
Copyright 2020-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth
Last html export of this page out of FM database by TL: 2025-09-21