SGiqpin

by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - Modeling function
Introduced first in SolidGeometry 5.0, Creation date: 2021-02-02, Last change: 2025-09-15

returns a inch quarter hexagon pin as bolt or shaft for mechanisms

Description

This function and solid is part of the quarter inch mechanism family, that can be actuated by a standard hand drill with quarter inch bits.
If the parts are 3D printed make sure that you may need on some machines an offset such as 2*slfit('t') of exchieve the same dimensions as a metal part


See Also: SGiqpin , SGiqknob , SGiqlink , SGsbpin

Example Illustration

missing image of SGiqpin(H,iqpar,RL)

Syntax

SG=SGiqpin([H,iqpar,RL])

Input Parameter

H: Height default is 4 rings (16 mm)
iqpar: [wall ring angle slfit('c')]; default is [2 2 pi/2 slfit('c')]
RL: Wrench size diameter; default is 25.4/4 mm

Output Parameter

SG: Pin with Base frame and Follower frame

Examples


SGiqpin(16)



Copyright 2021-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth

Last html export of this page out of FM database by TL: 2025-09-21