SGsupportFS
by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - Modeling function
Introduced first in SolidGeometry 5.0, Creation date: 2020-11-20, Last change: 2025-09-15
STL processing fnct to increase or reduce the wall thick by material support
Description
This function is used to increase the wallthickss of FS by simply adding an additional material support ontop
extracted from exp_2020_11_20_FSgrow
See Also: SGsurfacecutoutncover
, SGgrowoutsideFS
, SGofSurface
, VLFLofSGTsurface
, SGofSGTsurface
, SGsurfaceselect
Example Illustration
Syntax
SG=SGsupportFS([SG,fi,wt,in])
Input Parameter
SG: | | Solid Geometry |
fi: | | list of indices of different FS |
wt: | | wall thickness; default is 2.5mm can also be negative |
in: | | intrusion; default is -0.05 == 50µm |
Output Parameter
Examples
SGsupportFS(SGbox,[4 6]) % create supprting walls
Copyright 2020-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth
Last html export of this page out of FM database by TL: 2025-09-21