DIN433

by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - ENG-Standards
Introduced first in SolidGeometry 4.9, Creation date: 2020-08-05, Last change: 2025-09-14

returns the DIN433 table for a 2D Metric Washer

Description

'M','Inner_Diameter','Outer_Diameter','Height'
The inner diameter is also the norm diameter for a drilling hole for a screw of this size. I.e. for M5 screws use a 5.3mm diameter for the drilling hole

See Also: DIN13 , DIN20273 , DIN336 , DIN464 , DIN4AMfitting , DIN7991 , DIN912 , DIN913 , DIN934 , DIN965 , DIN985 , DINfindinTab

Example Illustration

missing image of DIN433(M)

Syntax

[M,TL,Taborder]=DIN433(M)

Input Parameter

M: Desired metric diameter

Output Parameter

M: Metric Diameter in Tab
TL: Table row
Taborder: Table colum names

Examples


DIN433
DIN433(2.3)
DIN_433=DIN433; DINfindinTab(2.3,DIN_433)



Copyright 2020-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth

Last html export of this page out of FM database by TL: 2025-09-21