DIN4AMfitting
by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - ENG-Standards
Introduced first in SolidGeometry 4.9, Creation date: 2020-08-05, Last change: 2025-09-14
DIN similar table for fitting offsets with different AM-Printers
Description
The data was measured with
- 5mm holes and 5mm dowel pins
- 2.5mm hexagonal bits
clearance_fit', => Spielpassung
'transition_fit', => Übergangspassung
'interference_fit'=> Presspassung
See also Fischer et al (2011), Page 99ff.
Values in the Table are:
2023-03-07: BambuLab-X1
2020-11-04: Anycubic Predator
2020-08-05: EOS Formiga100
2020-08-05: Formlab 2, Formlab 2+ and Formlab 3B
2020-08-05: EOS Formiga100
See Also: DIN13
, DIN20273
, DIN336
, DIN433
, DIN464
, DIN7991
, DIN912
, DIN913
, DIN934
, DIN965
, DIN985
, DINfindinTab
Example Illustration
Syntax
[M,TL,Taborder]=DIN4AMfitting(M,[Q])
Input Parameter
M: | | Search term such as "Formiga' |
Q: | | Optional search term in Taborder |
Output Parameter
M: | | Number oder Char such as "Formiga' |
TL: | | Table or table entry if Q is used |
Taborder: | | Name of Table cols |
Examples
DIN4AMfitting
[M,TL]=DIN4AMfitting ('FORM2')
[M,TL]=DIN4AMfitting ('FORM3B','trans')
DIN4AMfitting('get')
DIN4AMfitting('set','Bambu')
References
- Fischer et al. (2011): Tabellenbuch Metall, Verlag Europa-Lehrmittel, Nourney, 45. Auflage,
Copyright 2020-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth
Last html export of this page out of FM database by TL: 2025-09-21