SGraamboTCPMagnetM22
by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - Serial-Robotics
Introduced first in SolidGeometry 5.4, Creation date: 2024-07-27, Last change: 2025-09-15
creates gear wheel for the 6th axis of Raambo
Description
This function creates a magnetic adapter for the Raambo 2024_V4/5/6 designed by Erik Löwe:
m=1, n=19, h=5 with a strong magnet D18x5 and a T30 disassembly cavity
See Also: , SGmotorFeeTech40flange
, SGraamboTCPtoolM16ofCPL
, SGraamboTCPMagnetM22torquelimit
Example Illustration
Syntax
[SGNut,SGScr]=SGraamboTCPMagnetM22([CPLu,hcpl,"STL"])
Input Parameter
CPLu: | | Contour of an inlay |
hcpl: | | height of the inlay; default is 5 |
"STL": | | if used an STL File of both parts are written |
Output Parameter
SGNut: | | Gear-wheel-cap for the TCP motor of Raambo holding a magnet |
SGScr: | | Gear-wheel-cap screw for the TCP motor of Raambo M22 |
Examples
SGraamboTCPMagnetM22 % is usually called by other SGraambo functs
SGraamboTCPMagnetM22('stl') % is usually called by other SGraambo functs
Copyright 2024-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth
Last html export of this page out of FM database by TL: 2025-09-21