SGboxturnswitch

by Tim C. Lueth, SG-Lib Toolbox: SolidGeometry 5.6 - Automatic Design
Introduced first in SolidGeometry 5.2, Creation date: 2022-03-17, Last change: 2025-08-18

Solid Geometry for 6V Batterie box plus 1 turn-switch to support simple DC-Motor control

Description

Test with a project of Philipp Paprottka
Rotary switch: 4 x 3 for switching but 2 x 3 ==> (+/-) x (forward/stop/backward) would be enough
6 V Battery box is used: https://www.amazon.de/gp/product/B0761TSC32
4x3 Rotary switch used: https://www.amazon.de/gp/product/B07DQLNWQL
2.5mm JST-SM 2 pole used: https://www.amazon.de/dp/B07QM13SRX
Wire 22 AWG: https://www.amazon.de/dp/B0792Y7RHP
or
https://www.amazon.de/dp/B06WGN56V2/
==
Crimping tool 32WM-20AWG: https://www.amazon.de/gp/product/B002AVVO7K/
Wire stripper 34-22AWG: https://www.amazon.de/dp/B001YHELPS


See Also: SGclampCTtable , SGdesignBoltedLid

Example Illustration

missing image of SGboxturnswitch()

Syntax

SGboxturnswitch([])

Examples


SGboxturnswitch



Copyright 2022-2025 Tim C. Lueth. All rights reserved. The code is the property of Tim C. Lueth and may not be redistributed or modified without explicit written permission. This software may be used free of charge for academic research and teaching purposes only. Commercial use, redistribution, modification, or reverse engineering is strictly prohibited. Access to source code is restricted and granted only under specific agreements. For licensing inquiries or commercial use, please contact: Tim C. Lueth

Last html export of this page out of FM database by TL: 2025-09-21